Force Sensitive Resistor FSR402

৳ 595

The Force Sensitive Resistor FSR402 is a type of sensor that is used to detect and measure force or pressure.

  • Size: 1/2″ (12.5mm)
  • Diameter active area by 0.02″ thick (Interlink does have some that are as large as 1.5″x1.5″)
  • Resistance range: Infinite/open circuit (no pressure), 100KΩ (light pressure) to 200Ω (max. pressure)
  • Force range: 0 to 20 lb. (0 to 100 Newtons) applied evenly over the 0.125 sq in surface area
  • Supply Voltage: 3.3 – 5 Volts

In stock (can be backordered)

SKU: A1B000 Categories: , Tags: ,

Force Sensitive Resistor FSR402

The Force Sensitive Resistor FSR402 is a type of sensor that is used to detect and measure force or pressure. The FSR402 is a specific type of FSR that is designed to be sensitive to relatively small forces, making it suitable for use in applications where high sensitivity is required.

FSRs consist of a conductive material, such as carbon or metallic particles, that is embedded in a flexible polymer substrate. When a force is applied to the FSR, it deforms the substrate, causing the conductive material to make contact with additional areas of the substrate. This increases the overall conductivity of the FSR, allowing a current to flow through it. By measuring the change in conductivity of the FSR, it is possible to determine the magnitude of the force being applied to it.

Specification:

  • Size: 1/2″ (12.5mm)
  • Diameter active area by 0.02″ thick (Interlink does have some that are as large as 1.5″x1.5″)
  • Resistance range: Infinite/open circuit (no pressure), 100KΩ (light pressure) to 200Ω (max. pressure)
  • Force range: 0 to 20 lb. (0 to 100 Newtons) applied evenly over the 0.125 sq in surface area
  • Supply Voltage: 3.3 – 5 Volts

Datasheet:
https://cdn-learn.adafruit.com/assets/assets/000/010/126/original/fsrguide.pdf#page=1&zoom=auto,-98,799

Force-sensitive switches, touch displays, pressure sensors, and other devices all frequently employ FSRs. They are frequently used in conjunction with microcontrollers or other electronic circuits that can detect and measure force or pressure by detecting changes in the conductivity of the FSR.

An electrical circuit that can measure the conductivity of the FSR and a power source must be connected in order to use an FSR402. The conductivity will rise when a force is applied to the FSR, and the electronic circuit will notice this change and send a signal indicating the strength of the force. The Force Sensitive Resistor FSR402 can then be used to trigger an alarm, activate a control system, or perform other functions depending on the specific application.

Click Components for more products at RobotechBD, Bangladesh.

ফোর্স (ওজন বা প্রেশার এর ইকুইভ্যালেন্ট) হিসাব করে আউটপুট প্রসেস করতে হলে এটি একটি প্রয়োজনীয় কম্পোনেন্ট। (সর্বোচ্চ ২০ পাউন্ড)

 

0

TOP

X