- You have no items in your shopping cart
- Subtotal: ৳ 0
AVR MCU ATmega16 Development Board
৳ 450
Atmega16 Development Board provides a very simple and cost effective platform for prototyping solution. The compact design provides connection to all the pins of the microcontroller for the user.
- 28 I/O pins all the leads.
- Classic ATmega16 minimum system, eliminating the hassle of soldering
- Crystal: The socket hole welding facilitates the buyer to replace the crystal, 12MHZ crystal
- Support chips: ATmega16/ATmega32 and chips which are pin-compatible
- Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
- DC-005 Power Block (supporting the transposon is 5.5*2.1mm)
- Expand outside 4 channel VCC, GND
- Reset: Power-on reset and reset button
- Power LED (D1) and program run indicator (D2)
- Standard ISP download interface
In stock
AVR MCU ATmega16 Development Board
The MCU socket on AVR MCU ATmega16 Development Board provides support for 40 pin DIP package of AVR ATMega16/32 controller. The board is made for general purpose applications and includes a variety of hardware to exercise microcontroller peripherals. It is a fantastic tool for code debugging, development and prototyping.
Prototyping solution available for 28-pin ATmega series AVR microcontroller from ATMEL All three ports are available to the user via a standard 10-pin box header with the supply of 5 VDC for interfacing circuits. Onboard reset switch for easy reset of the microcontroller. ISP (In-circuit Serial Programming) connector available for chips with ISP support – 8 MHz crystal on board – UART level shifter circuit using MAX232 IC, onboard for easy connection of the board to the RS232 devices – Jumper selectable connection available for connecting the UART level Shifter to the port pins – Onboard voltage regulator available for sourcing regulated 5V @ up to 1A voltage to the board and connecting circuit – Power-On LED indicator – AUX Power source of 5 VDC available on a PBT connector for sourcing DC supply to interfacing circuits – Four mounting holes of 3.2 mm each – PCB dimensions 60 mm x 89 mm
Description
1. 28 I/O pins all the leads.
2. Classic ATmega16 minimum system, eliminating the hassle of soldering
3. Crystal: The socket hole welding facilitates the buyer to replace the crystal, 12MHZ crystal
4. support chips: ATmega16/ATmega32 and chips which are pin-compatible
5. Power supply: power adapter or external expansion pin power supply (not support ISP download interface power supply)
6. DC-005 Power Block (supporting the transposon is 5.5*2.1mm)
7. expand outside 4 channel VCC, GND
8. Reset: Power-on reset and reset button
9. Power LED (D1) and program run indicator (D2)
10 standard ISP download interface
What is an AVR board?
AVR is a single chip AVR development board which was developed by Atmel Corporation in 1996. It architecture was developed by Alf-Egil Bogen and Vegard Wollan. AVR obtain its name from Initial alphabet of each developer and was named as advanced virtual RISC microcontroller.
What is AVR used for?
An automatic voltage regulator (AVR) is an electronic device that maintains a constant voltage level to electrical equipment on the same load. The AVR regulates voltage variations to deliver constant, reliable power supply.
What is the difference between ATmega16 and ATmega32?
ATmega32 is very much similar to ATmega16 microcontroller with certain differences which are discussed below. ATmega32 is an 8-bit high performance microcontroller of Atmel’s Mega AVR family. Atmega32 is based on RISC (Reduced Instruction Set Computing) architecture with 131 powerful instructions.
What is Atmel AVR ATmega16 microcontroller?
CMOS RISC, AVR ATmega16, 8-BIT Microcontroller, In-system Programmable with Flash code storage, re-programmble up to 1000 times. Features 32 working registers, single clock cycle execution giving up to 1MIPs/MHz. ATmega16 Features. 16K BYTES of In-System Programmable Flash.
Related Video : Arduino LCD Shield – Coding Menus the Easy Way
For more programmers, click Programmer
AVR হল একটি একক চিপ AVR ডেভেলপমেন্ট বোর্ড যা 1996 সালে Atmel Corporation দ্বারা তৈরি করা হয়েছিল। এটির স্থাপত্যটি আলফ-ইগিল বোগেন এবং ভেগার্ড উলান দ্বারা তৈরি করা হয়েছিল। AVR প্রতিটি ডেভেলপারের প্রাথমিক বর্ণমালা থেকে এর নাম পায় এবং উন্নত ভার্চুয়াল RISC মাইক্রোকন্ট্রোলার হিসাবে নামকরণ করা হয়।
AVR MCU ATmega16 Development Board এর MCU সকেট AVR ATMega16/32 কন্ট্রোলারের 40 পিন ডিআইপি প্যাকেজের জন্য সমর্থন প্রদান করে। বোর্ডটি সাধারণ উদ্দেশ্যে অ্যাপ্লিকেশনের জন্য তৈরি করা হয়েছে এবং মাইক্রোকন্ট্রোলার পেরিফেরালগুলি অনুশীলন করার জন্য বিভিন্ন হার্ডওয়্যার অন্তর্ভুক্ত করে। এটি কোড ডিবাগিং, ডেভেলপমেন্ট এবং প্রোটোটাইপিংয়ের জন্য একটি চমত্কার টুল।
Keep an eye on our website to avail the –
AVR MCU ATmega16 Development Board best price in BD (Bangladesh)
You must be logged in to post a review.
Reviews
There are no reviews yet.