Infrared Obstacle Sensor Module has a built-in IR transmitter and IR receiver that sends out IR energy and looks for reflected IR energy to detect the presence of any obstacle in front of the sensor module. The module has an onboard potentiometer that lets users adjust the detection range.
IR Infrared Obstacle Avoidance IR Sensor Module (Active Low) has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are reflected back, the reflected IR waves will be received by the receiver tube. The onboard comparator circuitry does the processing and the green indicator LED comes to life.
The module features a 3 wire interface with Vcc, GND, and an OUTPUT pin on its tail. It works fine with 3.3 to 5V levels. Upon hindrance/reflectance, the output pin gives out a digital signal (a low-level signal). The onboard preset helps to fine-tune the range of operation, the effective distance range is 2cm to 80cm.
Connections
1. Connect the Vcc of the Sensor Module to the Vcc of Arduino Board
2. Connect GND of the Sensor Module to the GND of the Arduino Board.
3. Connect the output pin of the sensor module to pin 7 of the Arduino Board.
4. When the Obstacle Avoidance Sensor detects an obstacle, the LED will be on. Otherwise, it will be off.
Connection Diagram:
Features:
Easy to assemble and use
Onboard detection indication
The effective distance range of 2cm to 80cm
A preset knob to fine-tune distance range
If there is an obstacle, the indicator lights on the circuit board.
Infrared Obstacle Avoidance sensors are cheap, small sensors often used in robots, and Arduino project to detect objects near the sensor. The Infrared sensors work by sending an infrared light with some frequency, and then detecting if some of the light has reflected back to the sensor.
What is IR infrared obstacle avoidance sensor module?
Infrared Obstacle Sensor Module has a built-in IR transmitter and IR receiver that sends out IR energy and looks for reflected IR energy to detect the presence of any obstacle in front of the sensor module. The module has an onboard potentiometer that lets users adjust the detection range.
How do you test an IR sensor module?
Testing your IR sensor module is easy, just power the Vcc and Gnd pin with 5V and Ground respectively and bring your hand near the IR sensors. You should be able to see the signal LED on the module turn on if everything is working.
Are infrared sensors safe?
In home security, IR sensors are commonly used for motion detection and cameras. Since IR technology is safe, reliable, and inexpensive, devices that use IR detection are known for also being safe, reliable, and inexpensive
What is the price of IR Infrared Obstacle Avoidance Sensor Module in Bangladesh?
Please check out our price at the top of the page.
ইনফ্রারেড বাধা পরিহার সেন্সরগুলি সস্তা, ছোট সেন্সরগুলি প্রায়শই রোবটে ব্যবহৃত হয় এবং সেন্সরের কাছাকাছি বস্তুগুলি সনাক্ত করতে Arduino প্রকল্প। ইনফ্রারেড সেন্সরগুলি কিছু ফ্রিকোয়েন্সি সহ একটি ইনফ্রারেড আলো পাঠিয়ে কাজ করে এবং তারপর কিছু আলো সেন্সরে প্রতিফলিত হয়েছে কিনা তা সনাক্ত করে। ইনফ্রারেড অবস্ট্যাকল সেন্সর মডিউলে একটি বিল্ট-ইন IR ট্রান্সমিটার এবং IR রিসিভার রয়েছে যা IR শক্তি পাঠায় এবং সেন্সর মডিউলের সামনে কোনো বাধার উপস্থিতি সনাক্ত করতে প্রতিফলিত IR শক্তির সন্ধান করে। মডিউলটিতে একটি অনবোর্ড পটেনটিওমিটার রয়েছে যা ব্যবহারকারীদের সনাক্তকরণের পরিসীমা সামঞ্জস্য করতে দেয়।
Infrared Obstacle Avoidance Sensor best price in Bangladesh
2 reviews for IR Infrared Obstacle Avoidance Sensor Module
ok
Good quality