Water Level Depth Detection Sensor Module

This is simple and small portable water level/water droplet identification, detection sensor water that has high cost performance. Complete water yield and analog conversion, the output value apply to your custom function. It is low power consumption and high sensitivity. It can make better performance with Arduino 328 controller and sensor relay shield.

Water Sensor A water level sensor is an easy-to-use, cost-effective high-level/drop recognition sensor, which is obtained by having a series of parallel wires exposed traces measured droplets/water volume to determine the water level. Easy to complete water-to-an analog signal conversion and output analog values can be directly read Arduino development board to achieve the level alarm effect.

How to Connect:

S (Signal) pin is an analog output that will be connected to one of the analog inputs on your Arduino.

+ (VCC) pin supplies power for the sensor. It is recommended that the sensor be powered with 3.3V – 5V. Please note that the analog output will vary depending on what voltage is provided for the sensor.

– (GND) is a ground connection.

Specifications:

1. Working Voltage: DC 3-5V
2. Working Current: <20mA
3. Operating temperature: 10~30 Celsius
4. Sensor Type: Analog
5. Detection Area: 40 mm x 16 mm
6. Size : 65 mm x 20 mm x 8 mm
7. Humidity: 10% -90% non-condensing