MQ-6 Gas Sensor Module

৳ 145

  • Good sensitivity to Combustible gas in a wide range
  • High sensitivity to Propane, Butane, and LPG
  • Long life and low cost
  • Simple drive circuit
  • An indication of the signal output
  • Dual signal output (analog output, and TTL level output)
  • The TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
  • 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage.
  • High sensitivity to hydrogen.
  • Can be resistant to ethanol steam, LPG (petroleum), smoke interference.
  • Has a long life and reliable stability.
  • Fast response and recovery characteristics.

Out of stock

SKU: A1BP087 Categories: , Tags: ,

Description of MQ-6 Gas Sensor Module –

MQ-6 Liquefied Petroleum Isobutane Propane Gas sensor module is a great way to add basic gas sensing to your project at a reasonable price. TheMQ-5 Methane LPG Liquid Propane Gas Sensor Module particulate sensor uses a Buzzer to sense any detected material that is even present in the air!

This is a simple-to-use MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module, suitable for sensing LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm. The MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module particulate sensor uses a Potentiometer to change the detection range of the sensor!

This sensor has high sensitivity and a fast response time. The sensor’s output is an analog resistance. The drive circuit is very simple, all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.

The sensitive material of the MQ-6 gas sensor is a tin oxide (SnO2), which with lower conductivity in clean air. When the target combustible gas exists, The sensor’s conductivity is higher along with the gas concentration rising. Please use a simple electro circuit, Convert the change of conductivity to the corresponding output signal of gas concentration.

MQ-6 gas sensor has a high sensitivity to Propane, Butane, and LPG, also the response to Natural gas. The sensor could be used to detect different combustible gas, especially Methane, which is with low cost and suitable for different applications.

Applications

  1. The domestic gas leakage detector
  2. Industrial Combustible gas detector
  3. Portable gas detector

Features

  • Good sensitivity to Combustible gas in a wide range
  • High sensitivity to Propane, Butane, and LPG
  • Long life and low cost
  • Simple drive circuit
  • An indication of the signal output
  • Dual signal output (analog output, and TTL level output)
  • The TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
  • 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage.
  • High sensitivity to hydrogen.
  • Can be resistant to ethanol steam, LPG (petroleum), smoke interference.
  • Has a long life and reliable stability.
  • Fast response and recovery characteristics.
Pin Configuration
1VccThis pin powers the module, typically the operating voltage is +5V
2GroundUsed to connect the module to system ground
3Digital OutYou can also use this sensor to get digital output from this pin, by setting a threshold value using the potentiometer
4Analog OutThis pin outputs 0-5V analog voltage based on the intensity of the gas
The LPG (Propane) Gas Sensor Module is designed to allow a microcontroller to determine when a preset propane gas level has been reached or exceeded. Interfacing with the sensor module is done through a 4-pin SIP header and requires two I/O pins from the host microcontroller.
MQ2 gas sensor is an electronic sensor used for sensing the concentration of gases in the air such as LPG, propane, methane, hydrogen, alcohol, smoke and carbon monoxide. MQ2 gas sensor is also known as chemiresistor. It contains a sensing material whose resistance changes when it comes in contact with the gas.

For related video, click here

Also do not forget to check out our other Gas and Air sensors in the Gas & Air Sensors section. Thank you.

 

MQ6 (LPG গ্যাস সেন্সর) হল একটি সহজ-থেকে-ব্যবহারযোগ্য তরলীকৃত পেট্রোলিয়াম গ্যাস (LPG) সেন্সর। এটি ভোক্তা এবং শিল্প অ্যাপ্লিকেশনগুলিতে গ্যাস লিকেজ সনাক্তকারী সরঞ্জামগুলিতে ব্যবহার করা যেতে পারে, এই সেন্সরটি এলপিজি, আইসো-বিউটেন, প্রোপেন, এলএনজি সনাক্ত করার জন্য উপযুক্ত।

MQ-6 Gas Sensor Module best price in Bangladesh
0

TOP

X