- You have no items in your shopping cart
- Subtotal: ৳ 0
MPL3115A2 I2C Intelligent Temperature Pressure Altitude Sensor V2.0 for Arduino
৳ 950
Specification:
– V2.0 version added power conversion module and IO port level conversion circuit for the 3.3V MCU and 5V chip
– Resolution:< 1 feet /0.3 M
– Pressure range: 20 – 110 kPa
– Compensation, direct reading (don’t need software): 20bit pressure measurement (Pascal) 20bit measurements of height (metres) 12bit temperature measurement
– Onboard intelligence
– Sampling rate: maximum 128 Hz
In stock
MPL3115A2 I2C Intelligent Temperature Pressure Altitude Sensor V2.0 for Arduino
Specification:
V2.0 version added power conversion module and IO port level conversion circuit for the 3.3V MCU and 5V chip
Resolution:< 1 feet /0.3 M
Pressure range: 20 – 110 kPa
Compensation, direct reading (don’t need software):
20bit pressure measurement (Pascal)
20bit measurements of height (metres)
12bit temperature measurement
Onboard intelligence
Sampling rate: maximum 128 Hz
Resolution:< 1 feet /0.3 M
Pressure range: 20 – 110 kPa
Compensation, direct reading (don’t need software):
20bit pressure measurement (Pascal)
20bit measurements of height (metres)
12bit temperature measurement
Onboard intelligence
Sampling rate: maximum 128 Hz
Parameter:
Absolute pressure measuring range: 20 to 110 kPa
Relative measuring accuracy: -+0.05 kPa
Effective resolution: 1.5Pa / 0.3m
Working temperature range: -40 to 85℃
Power supply voltage: 2.5 to 5 V
Logic IO port: 2.5 to 5 V
I/O power supply voltage: 1.62 to 3.6 V
Absolute pressure measuring range: 20 to 110 kPa
Relative measuring accuracy: -+0.05 kPa
Effective resolution: 1.5Pa / 0.3m
Working temperature range: -40 to 85℃
Power supply voltage: 2.5 to 5 V
Logic IO port: 2.5 to 5 V
I/O power supply voltage: 1.62 to 3.6 V
Power:
Standby mode: 2μA
Low power mode: 8.5μA, 1Hz sampling
Compensated data output:
20 the pressure data, output per unit of Pascal
20 height data, output per unit of meter
12 temperature data, output per unit of degree C
I2C digital output interface
2* programmable interrupt pin
Built in 32 sample buffer of FIFO
Standby mode: 2μA
Low power mode: 8.5μA, 1Hz sampling
Compensated data output:
20 the pressure data, output per unit of Pascal
20 height data, output per unit of meter
12 temperature data, output per unit of degree C
I2C digital output interface
2* programmable interrupt pin
Built in 32 sample buffer of FIFO
Package include:
1 x Module
Product type: Electronic Modules
Description
This pressure sensor is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters (compare to the BMP180 which can do 0.17m). It has some upsides compared to the BMP280, such as interrupt outputs for ultra-low power usage, and its also a heck of a lot easier to read altitude with a built in altimeter calculation – no calibration reading and calculating required. As a bonus, there’s even a fairly good temperature sensor with ±1°C typical accuracy (±3°C max).
This chip likes to be used with 2-3.6V power and logic voltages, so we placed it on a breakout with a 3V regulator and logic level shifting. Its easy to use with any Arduino or microcontroller that has i2c capability.
For more Arduino boards, click here
Keep an eye on our website to avail the –
MPL3115A2 I2C Intelligent Temperature Pressure Altitude Sensor V2.0 for Arduino best price in BD (Bangladesh)
Be the first to review “MPL3115A2 I2C Intelligent Temperature Pressure Altitude Sensor V2.0 for Arduino”
You must be logged in to post a review.
Reviews
There are no reviews yet.